:: Stockroom Supply - "V" Drum Sander




	We have come to realize that sooner or later, every woodworker becomes aware of their need for our V-Drum Sander. Whether it be for surface sanding, edge sanding, stripping paint, restoration or whatever unique purpose they have in mind, this sander will do it! Originally designed to be a poor man's drum sander, this product has changed the way woodworkers surface sand. It has been featured on HGTV's In The Workshop, and in several magazines within Canada and the US. The word continues to spread about this outstanding tool. Be sure to check out the video of this product by clicking on the video button below.

	View what other Websites have to say...

	Unique Features of the V-Drum
	1. No clips needed for holding paper. VELCRO brand hook and loop is used for changing paper - simply unroll one grit and roll on another.
	2. On longer drums use two or three different grits at once.
	3. Klingspor brand stearate coated paper will sand pine, paint and even nails without damaging the sandpaper, a savings to the user.
	4. Sandpaper used on the V-Drum is less costly than the clothback paper used for commercial units.
	5. The drum is made form polycarbonate tubing which runs cooler and eliminates static. With no static on the drum, dust won't stick to the paper. Instead it drops down into the box, allowing for easier dust collection.
	6. With the use of fences and hold downs, the drum works much like a jointer.
	7. Centrifugal force is a key element. Firstly it lifts paper off the drum creating an air gap. The air gap prevents the drum from creating heat, which in turn helps paper to last longer. Secondly, centrifugal force means it takes less power to run the "V"-Drum as the drum is not forcing the paper into the wood.
	8. Depth of cut is changed by switching the grit of sandpaper. If you want to cut more use a coarser grit, but to cut less, use a finer grit, etc.


	The Works Kits - 12" x 2" V-Drum The Works. - 12" x 4" V-Drum The Works. - 18" x 2" V-Drum The Works. - 24" x 4" V-Drum The Works. - 30" x 4" V-Drum The Works. The Works includes the drum of choice, bearings, 2 - 10yd rolls of sandpaper, 2 balanced pulleys, Linkbelt, and a plan to build the box. Sizes of bearings, pulleys, and length of linkbelt will vary according to the size of drum ordered. The 18" Works Kit includes 1.8" diameter with 1.5" bore pulley for the drum and a 2" x 1.5" pulley for the motor, and the 24" and 30" Works Kit includes 2 3" x 5/8" pulleys.



Click Here to see V-Drum Sander Accessories